2010-07-03   Release 2.13

    Mike McCauley (1):
          Fix memory leak in sha1_transform



2009-05-23   Release 2.12

    Gisle Aas (6):
	  Get rid of the old CVS ids
	  Avoid "redefined" error for ULONG on Win64
	  Less optimizations on IRIX [RT#8999]
	  Clean up the 'git status' output
	  Mention that SHA-1 might be weak [RT#11880]
	  Ensure more stuff in the META.yml file [RT#40757]

    Steve Peters (1):
	  Quiet warnings when compiled with -Wwrite-strings [RT#31915]



2006-01-18   Gisle Aas <gisle@ActiveState.com>

   Release 2.11

   Internal cleanup to avoid some compiler warnings.



2004-04-05   Gisle Aas <gisle@ActiveState.com>

   Release 2.10

   Restore compatibility with perl-5.004 and perl-5.005.



2004-04-01   Gisle Aas <gisle@ActiveState.com>

   Release 2.09

   The 2.08 release did not compile with a threaded debugging
   perl, because assert() then needs my_perl.  Fixed by commenting
   out the asserts.



2004-04-01   Gisle Aas <gisle@ActiveState.com>

   Release 2.08

   Enable PERL_NO_GET_CONTEXT for more more efficient execution
   on a threaded perl.

   Fix up md5 references.  Patch by Ville Skyttä <ville.skytta@iki.fi>.



2003-12-05   Gisle Aas <gisle@ActiveState.com>

   Release 2.07

   Inherit add_bits() from Digest::base if available.

   

2003-10-13   Gisle Aas <gisle@ActiveState.com>

   Release 2.06

   The sha1_transform() function did not check that it was actually
   passed any arguments.

   Complete self-contained documentation included (copied from
   Digest::MD5), since the Digest.pm manpage is not always available.



2003-10-06   Gisle Aas <gisle@ActiveState.com>

   Release 2.05

   Added missing cast to support C++ compilation.  Patch by Jan Dubois.

   Document that the sha1_base64 function and the b64digest method
   does not pad their result.



2003-07-22   Gisle Aas <gisle@ActiveState.com>

   Release 2.04

   Don't assume PerlIO_read() works like fread() even though
   it was documented like that for perl 5.6.  It returns negative
   on read failure.

   Kill test #3 in t/badfile.t.  I don't know a reliable way
   to test read failures on a file handle.  Seems better not to
   test than to make many worry.



2003-07-05   Gisle Aas <gisle@ActiveState.com>

   Release 2.03

   Implemented sha1_transform, required to implement NIST FIPS 186-2.
   Contributed by Mike McCauley <mikem@open.com.au>.

   Make it build on 64-bit platforms with 32-bit longs.  At least
   I hope it will.

   Sync up with the Digest::MD5 implementation:
      - added clone method
      - addfile croaks if it can't read
      - the sha1*() functions warn if called as method
        or with reference arguments.



2002-12-27   Gisle Aas <gisle@ActiveState.com>

   Release 2.02

   Make it work when there is a mismatch between the
   sizeof(BYTEORDER) and sizeof(long).  Based on patch
   by Allen Smith <easmith@beatrice.rutgers.edu>.

   Support UTF8 strings in newer versions of Perl.



2001-12-30   Gisle Aas <gisle@ActiveState.com>

   Release 2.01

   Applied trivial win32 fix from Gurusamy Sarathy that
   avoids stray temp files left after 'make test'.



2001-03-13   Gisle Aas <gisle@ActiveState.com>

   Release 2.00

   Broken out of the Digest-MD5-2.12 distribution and made into
   a separate dist.



-------------------------------------------------------------------
Changes below from the Digest-MD5 dist.


2000-09-18   Gisle Aas <gisle@ActiveState.com>

   Release 2.12

   Avoid pointer cast warning for machines with bigger ints
   than pointers.  Patch by Robin Barker <rmb1@cise.npl.co.uk>.



2000-08-19   Gisle Aas <gisle@ActiveState.com>

   Release 2.11
   
   The fallback code introduced in 2.10 did only work for
   perl-5.6.0.  It should now for for perl5.004 and 5.005
   as well.  Patch by Ville Skyttä <ville@office.popsystems.com>.



2000-08-18   Gisle Aas <gisle@ActiveState.com>

   Release 2.10

   Digest::MD5 will now try to fallback to the pure perl
   implementation of Digest::Perl::MD5 if bootstrap fails.

   Added a bit internal paranoia about casting the IV
   in the Digest::MD5 object to the MD5_CTX* pointer.



1999-08-06   Gisle Aas <gisle@aas.no>

   Release 2.09

   Documentation update.



1999-07-28   Gisle Aas <gisle@aas.no>

   Release 2.08

   The addfile() methods could trigger a core dump when passed
   a filehandle that had failed to open.



1999-04-26   Gisle Aas <gisle@aas.no>

   Release 2.07

   The Digest::SHA1 module failed on some 64-bit systems, because I
   assumed there was a correspondence between the U32 size and
   BYTEORDER.  This version use 'unsigned long' as Uwe's original
   SHA module did.

   The module should now work better when liked statically with perl,
   because we now use a safer module-loaded test in Digest.pm.

   Assume we know the outcome of the alignment test on VMS. Patch by
   Chuck Lane <lane@duphy4.physics.drexel.edu>



1999-03-26   Gisle Aas <gisle@aas.no>

   Release 2.06

   Avoid LONG and BYTE types in SHA.xs as they was in conflict
   with similar definitions in <winnt.h>.

   Patch by Marko Asplund <aspa@hip.fi> to make the the alignment
   test program link successfully with sfio-perl.

   Fixed a typo in MD5.xs that might have affected 64-bit systems.
   Spotted by Nick Ing-Simmons



1999-03-15   Gisle Aas <gisle@aas.no>

   Release 2.05

   Included Digest::SHA1 based on Uwe Hollerbach's SHA module.



1999-03-05   Gisle Aas <gisle@aas.no>

   Release 2.04

   Avoid the -o option when compiling alignment test program
   for Win32 as suggested by Gurusamy Sarathy.

   DEC Compiler bug workaround.  Contributed by D Roland Walker
   <walker@ncbi.nlm.nih.gov>

   Having references to a local variable called "na" was not
   very safe either.  Some older versions of Perl can apparently
   macroize this into something completely different.



1999-02-27   Gisle Aas <gisle@aas.no>

   Release 2.03

   Patch from Christopher J. Madsen <chris_madsen@geocities.com> that
   should help getting the u32align test program to compile with
   Visual C++ 5 on Windows NT.

   Got rid of references to PL_na.



1999-01-31   Gisle Aas <gisle@aas.no>

   Release 2.02

   Added a hints file as workaround for an IRIX compiler bug.
   Contributed by D Roland Walker <walker@ncbi.nlm.nih.gov>.

   Note that the rfc2202 test can still fail on some DEC Alpha,
   because of a compiler bug that affects the perl 'x' operator.
   The Digest:: modules should work and be safe to install anyway.



1998-12-18   Gisle Aas <aas@sn.no>

   Release 2.01

   Some casts and tweaks to make picky compilers more happy.



1998-11-04   Gisle Aas <aas@sn.no>

   Release 2.00.

   Taken out Digest::SHA1 as this module will be provided from Uwe
   Hollerbach later.

   Some tweaks to MD2.xs and MD5.xs since "na" disappeared in
   perl5.005_53



1998-10-30   Gisle Aas <aas@sn.no>

   Release 1.99_60

   The 1.99_59 release introduced compilation problems for big-endian
   systems with free U32 alignment.  Bug reported, and fix suggested
   by Paul J. Schinder <schinder@pobox.com>.



1998-10-28   Gisle Aas <aas@sn.no>

   Release 1.99_59

   Makefile.PL will run a test program to find out if U32 values can
   be aligned anywhere.  This hopefully cures the core dumps reported
   on Solaris and other big endian systems.  Thanks to Graham Barr for
   debugging this.



1998-10-28   Gisle Aas <aas@sn.no>

   Release 1.99_58

   Should be very close to a 2.00 release now.  Need some success
   reports from people running on big-endian machines first I think.

   Added a Digest::MD2 implementation.

   Wrote Digest.pm documentation.  This define the interface that all
   Digest:: modules should provide.

   Avoided some code duplication in MD5.xs

   Fixed typo, that prevented Digest::SHA1::sha1_base64() from working.



1998-10-27   Gisle Aas <aas@sn.no>

   Release 1.99_57

   Rewritten most of the MD5 C code to make it real fast (especially
   on little-endian machines without alignment restrictions for U32).
   Compared to MD5-1.7 we can process files 4 times as fast and we
   digest small stuff in memory 7 times faster.  I came to these
   conclusions after these tests (gcc -O2, i586, Linux):

   First tested calculation of the digest of a 31 MB file, using
   perl -le 'print Digest::MD5->new->addfile(*STDIN)->hexdigest'
   and similar stuff:

      MD5-1.7:                 21.06s
      Digest::MD5-1.99_57:      5.23s
      md5sum (GNU textutils):   4.90s

   As you can see, we do nearly as good as the md5sum program.  I
   think the reason we don't beat md5sum is that perl always insist on
   loading extra modules like Config.pm, Carp.pm, strict.pm, vars.pm,
   AutoLoader.pm and DynaLoader.pm.  When I simply wrapped the MD5.xs
   hasher code in a C program I managed to process the file in 4.68s.

   Then we calculated the digest of the same 6 byte sting, 20000
   times:

      MD5-1.7:                 11.81s
      Digest::MD5-1.99_57:      1.68s

   Digest::MD5 benefit from making this into a plain procedure call
   instead of a static method call.


   Other changes in this release are:

   Documentation update

   Internal MD5.xs cleanup.

   $md5->digest will automatically reset now.

   Digest::HMAC methods add() and addfile() did not return the
   correct object.

   Added Digest.pm loading module.  I am not sure this is a good idea.

   Added Digest::SHA1 and Digest::HMAC_SHA1 module.  The Digest::SHA1
   module is just a wrapper around SHA.pm.  I hope to get the author
   of SHA.pm to move his module to the Digest:: category.



1998-10-25   Gisle Aas <aas@sn.no>

   Release 1.99_56

   Fix memcpy_byteswap() function in MD5.xs.  Must be careful with
   htovl() as it might evaluate its arguments more than once.



1998-10-25   Gisle Aas <aas@sn.no>

   Release 1.99_55

   Grahams HMAC_MD5.pm splitted into two modules.  Digest::HMAC and
   Digest::HMAC_MD5.  Also provide functional interface.  Documentation
   is still lacking.

   Included RFC 2202 based test for HMAC-MD5.



1998-10-24   Gisle Aas <aas@sn.no>

   Release 1.99_54

   Included HMAC_MD5.pm, contributed by Graham Barr <gbarr@ti.com>.

   I have a hard time to make up my mind :-)  md5_bin() renamed back
   to md5().   Functions are not exported by default any more.

   Try to Encode/Decode with memcpy_byteswap for 32-bit big-endian
   machines.



1998-10-23   Gisle Aas <aas@sn.no>

   Release 1.99_53

   Renamed core module as Digest::MD5.  Leave a MD5.pm stub for
   legacy code.

   The md5() function renamed as md5_bin().

   The constructor, Digest::MD5->new, no longer takes any extra
   arguments.

   Added some new tests.

   Updated the documentation.

   $md5->b64digest implemented with same base64 encoder as md5_base64.



1998-10-23   Gisle Aas <aas@sn.no>

   Release 1.99_52

   Patch from Graham Barr which make it work for big-endian machines
   again.



1998-10-22   Gisle Aas <aas@sn.no>

   Release 1.99_51

   The MD5 class is now subclassable.

   The add() and addfile() methods now return $self.

   The reset() method is just an alias for new().

   The constructor (MD5->new) now takes optional arguments which are
   automatically added.  It means that we can now write:

      MD5->new($data)->hexdigest;

   New $md5->b64digest method.

   New functions that are exported on request: md5, md5_hex, md5_base64

   Included RFC 1321

   Barely started to update the documentation.



1998-10-22   Gisle Aas <aas@sn.no>

   Release 1.99_50

   Much better performance (more than twice as fast now).  Mostly
   because we use Copy/Zero instead of the original MD5_memcpy and
   MD5_memset functions.

   The addfile() and hexdigest() methods are now XS implemented.

   All RSA functions now included in MD5.xs and made static.

   Use perl's Copy/Zero.

   Random cleanup, simplifications and reformatting.
   Merged things better with the perl configuration.



Neil Winton's versions below:


*** 96/06/20 Version 1.7

MD5 is now completely 64-bit clean (I hope). The basic MD5 code uses
32-bit quantities and requires a typedef UINT4 to be defined in
global.h. Perl configuration data (the value of BYTEORDER) is used to
determine if unsigned longs have 4 or 8 bytes. On 64-bit platforms (eg
DEC Alpha) then it assumes that "unsigned int" will be a 32-bit type.
If this is incorrect then adding -DUINT4_IS_LONG to the DEFINES line in
Makefile.PL will override this.

On some machines (at least Cray that I know of) there is no 32-bit
integer type. In this case defining TRUNCATE_UINT4 (which is done
automatically for a Cray) will ensure that 64-bit values are masked
down to 32 bits. I have done my best to test this but without easy
access to a true 64-bit machine I can not totally guarantee it (unless
anyone wants to lend me a spare Cray :-)

There is one remaining limitation for 64-bit enabled processors. The
amount of data passed to any single call to the underlying MD5
routines is limited to (2^32 - 1) bytes -- that's 4 gigabytes. I'm
sorry if that's a real problem for you ...

And finally, a minor compilation warning (unsigned char * used with
function having char * prototype) has also been eliminated.

*** 96/04/09 Version 1.6

Re-generated module framework using h2xs to pick up the latest module
conventions for versions etc. You can now say "use MD5 1.6;" and things
should work correctly. MD5.pod has been integrated into MD5.pm and
CHANGES renamed to Changes. There is a fairly comprehensive test.pl
which can be invoked via "make test". There are no functional changes
to the MD5 routines themselves.

*** 96/03/14 Version 1.5.3

Fixed addfile method to accept type-glob references for the file-handle
(eg \*STDOUT). This is more consistent with other routines and is now the
recommended way of passing file-handles. The documentation now gives more
examples as to how the routines might be used.

*** 96/03/12 Version 1.5.2

Minor fixes from Christopher J Madsen <madsen@computek.net> to provide
support for building on OS/2 (and to work around a perl -w bug).

Remove warning about possible difference between add('foo', 'bar') and
add('foobar'). This is not true (it may have been true in the earliest
version of the module but is no longer the case).

*** 96/03/08 Version 1.5.1

Add CHANGES file to make it easier for people to figure out what has
been going on. (Meant to do this as part of 1.5)

*** 96/03/05 Version 1.5

Add hash() and hexhash() methods at the suggestion/request of Gary
Howland <gary@kampai.euronet.nl> before inclusion in a wider library
of cryptography modules.

*** 96/02/27 Version 1.4

Finally fixed the pesky Solaris dynamic loading bug. All kudos to Ken
Pizzini <kenp@spry.com>!

*** 95/11/29 Version 1.3.1

Add explanations of current known problems.

*** 95/06/02 Version 1.3

Fix problems with scope resolution in addfile() reported by
Jean-Claude Giese <Jean-Claude.Giese@loria.fr>. Basically ARGV is
always implicitly in package main while other filehandles aren't.
 
*** 95/05/23 Version 1.2.1

[Changes pre 1.2.1 not recorded]